Viruton Pulver 1 kg

PLN155.00

Tax included

Viruton® Pulver is a modern generation preparation for cleaning and high-level disinfection of invasive and non-invasive medical devices.
It is recommended for surgical and dental instruments and all types of endoscopes, surgical probes, ventilator tubes and other anesthetic devices.

How to use: According to the dosage table, measure the appropriate amount of water at 25-30°C, then pour the appropriate amount using the enclosed measuring cup.
amount of powder, stir the solution, cover the vessel and leave to activate for 15 minutes. After this time, stir the solution again.
The use of warm water (temp. 35°C) will accelerate the dissolution of the powder. Small residues at the bottom of the vessel guarantee stability
solution over time. Protect from moisture. Close the container tightly after use. Do not immerse wet tools in the powder. Do not use on disposable instruments. Follow the instructions of the tool and equipment manufacturer. Do not use the product if the packaging is damaged. Store below 25°C. Use test strips to check the activity of the solution over time.

Cleaning and disinfection of tools and endoscopes:
thoroughly immerse the instruments, ensuring that all elements and channels of the medical equipment are completely filled with the solution. After the specified action time (10 minutes or 30 minutes depending on the selected concentration), remove the tools from the solution and rinse with drinking water (preferably sterile distilled water or demineralized water). Change the solution daily. The preparation is not intended for copper and brass tools, nor for mechanically damaged chrome and nickel-plated tools.

Washing and disinfection of surfaces (depending on the selected concentration): spray the surfaces of medical equipment with a 1% solution or wipe them with a cloth and leave to act for 10 minutes. The product leaves a white residue on the disinfected surface, so it is recommended to wipe off the residue with a disposable towel after disinfection

Washing and disinfection of incubators:
detailed instructions for disinfecting incubators available.

Composition: active substances in 100 g of the preparation:
44 g sodium percarbonate (CAS: 15630-89-4), 26 g TAED (CAS: 10543-57-4), enzymes, organic acids, non-ionic surfactants, corrosion inhibitors

Packaging:
1 kg with measuring cup